Boba Fett Prototype - Printed DIY
Boba Fett Prototype - Printed DIY
🚚 FREE Worldwide Shipping on orders over £75
Boba Fett Prototype Helmet DIY Kit
Here we have the awesome Boba Fett Prototype Helmet. It is identical to the standard Boba Fett helmet sans the famous dent. This helmet has been meticulously designed from scratch to be as accurate as possible to the movie prototype, as well as logistically simple to print, assemble and paint.
You can use 2 x (4mm diameter x 1mm thick) N42 Neodymium Magnets for the rangefinder to keep it at upright or lowered position. The right ear mechanism all snaps into place but we would recommend glue.
The Rangefinder Head has been designed to fit the Electronic Circuit Board by Westaby Electronics on Etsy.
*Please note - This is a DIY kit. Some pictures show what is possible to make on your own from this kit. The parts will need assembling, filling, sanding and painting and the fun is all in the build! Actual items received are the following raw 3D Printed parts:
• Main helmet
• Left Ear
• Right ear Inner
• Right ear Outer
• Right ear Lower
• RF Stalk
• RF Head Hollow
• RF Head Solid
• RF Acrylic
• RF Camera
• Borden Connector
• Back Grill
We're very proud of this helmet!
OPTIONAL EXTRAS
• NOW WITH VISOR INCLUDED! + £12.00
Circuitboard made by Westaby Electronics with 2 x Red flashing LED’s and 1 x White LED. Runs on a CR2032 watch battery (Not included). Rangefinder lights are required for 501st Approval.
SIZING
This helmet fits most adult male heads. If you believe you have a head larger than the average UK male of 57.2 cm circumference (measured at the brow), then please add a note to your order or message us on Facebook and we can make arrangements to print larger.
HOW LONG?
Orders are printed on demand. We usually dispatch within 1-2 weeks. However depending on volume or print failures it can take 1-4 weeks so please bare with us.
More Info
• This is not an official licensed product and is considered ‘Fan Art’.
• Buyers are responsible for any Customs and import taxes
• Due to the custom nature of the work, print and dispatch times may vary and are estimates only.
• Shipping delays can happen. Please understand that we cannot control everything but try our best to get your order to you as fast as possible.
Boba Fett Prototype Helmet DIY Kit
Here we have the awesome Boba Fett Prototype Helmet. It is identical to the standard Boba Fett helmet sans the famous dent. This helmet has been meticulously designed from scratch to be as accurate as possible to the movie prototype, as well as logistically simple to print, assemble and paint.
You can use 2 x (4mm diameter x 1mm thick) N42 Neodymium Magnets for the rangefinder to keep it at upright or lowered position. The right ear mechanism all snaps into place but we would recommend glue.
The Rangefinder Head has been designed to fit the Electronic Circuit Board by Westaby Electronics on Etsy.
*Please note - This is a DIY kit. Some pictures show what is possible to make on your own from this kit. The parts will need assembling, filling, sanding and painting and the fun is all in the build! Actual items received are the following raw 3D Printed parts:
• Main helmet
• Left Ear
• Right ear Inner
• Right ear Outer
• Right ear Lower
• RF Stalk
• RF Head Hollow
• RF Head Solid
• RF Acrylic
• RF Camera
• Borden Connector
• Back Grill
We're very proud of this helmet!
OPTIONAL EXTRAS
• NOW WITH VISOR INCLUDED! + £12.00
Circuitboard made by Westaby Electronics with 2 x Red flashing LED’s and 1 x White LED. Runs on a CR2032 watch battery (Not included). Rangefinder lights are required for 501st Approval.
SIZING
This helmet fits most adult male heads. If you believe you have a head larger than the average UK male of 57.2 cm circumference (measured at the brow), then please add a note to your order or message us on Facebook and we can make arrangements to print larger.
HOW LONG?
Orders are printed on demand. We usually dispatch within 1-2 weeks. However depending on volume or print failures it can take 1-4 weeks so please bare with us.
More Info
• This is not an official licensed product and is considered ‘Fan Art’.
• Buyers are responsible for any Customs and import taxes
• Due to the custom nature of the work, print and dispatch times may vary and are estimates only.
• Shipping delays can happen. Please understand that we cannot control everything but try our best to get your order to you as fast as possible.
Shipping is free worldwide on orders over £75.
Sabers normally take around 2 weeks to get through production before they are dispatched but this can increase during busy periods.
When your item is dispatched, it normally takes 2-3 days for delivery in the UK and 5-7 days for delivery outside the UK, depending on you delivery location.
Please note any additional customisation to your saber such as weathering and etching will increase the lead time on your order. This can be up to 2 weeks per job.
The majority of accessories, parts and toys are dispatched within a few days after placing your order if ordered alone and without a saber.
Sound Fonts and digital files can be sent immediately after purchase.
For information on taxes, imports duties and further information please see our shipping page which can be found here.
Please see our Christmas shipping dates and opening times here.